• Performance – up to 400 m3 of wood chips per hour;
• The maximum diameter of the processed wood – up to 100 cm;
• The raw material for recycling – waste timber processing (offcuts, etc.) and the “roundwood” (wood and technological wood);
• The opportunity to adjust the fraction of chips (35Х35, 50Х50, 80Х80, 100Х100);
• The possibility of raw materials on both sides (moving the side wall);
• The intake system allows you to take at the same time, large volumes of raw materials of any length
• Engine power — 780 h.p.
• The country of the manufacturer – Austria.

1. Flexibility. The long zone of raw material supply, open in front, with the possibility of filling on both sides;
2. Innovation. Two modes of cut. Aggressive supply of raw materials with the preliminary compression of the two horizontal and two vertical feed drum;
3. Reliability and ease of maintenance. Long and successful experience in the use of equipment in Europe. The modularity and quick access to all the components on the engine and equipment for reducing offcut that significantly reduces the time to service;
4. The power. The maximum performance is 400 m3 of wood chips per hour, which allows the Axtor 8012 to be the most powerful a mobile wood chopper complex in Ukraine;
5. The material. The opportunity to work with difficult raw material for processing (veneer, crop, lamellas, etc.).

Waste wood processing (pruning, slab), “roundwood” (firewood and technological wood) and waste veneer production.

• Performance – up to 200 m3 of wood chips per hour;
• The maximum diameter of the processed wood – up to 100 cm;
• Staffed with additional equipment for splitting large diameter wood;
• The raw material for recycling – waste timber processing (offcuts, etc.) and the “roundwood” (wood and technological wood);
• The opportunity to adjust the fraction of chips (35Х35, 50Х50, 80Х80, 100Х100);
• The intake system allows you to take at the same time, large volumes of raw materials;
• Engine power — 360 h.p.;
• The country of the manufacturer – Austria.

1. Mobility and power. High cross that allows you to comfortably pick the most remote sites of the client.
   The maximum performance is 200 m3 of wood chips per hour
2. Reliability and ease of maintenance. Long and successful experience in the use of equipment in Europe. The modularity and quick access to all the components on the engine and equipment for reducing offcut that significantly reduces the time to service;

Відходи лісопереробки (обрізки, обапол), та «круглий ліс» (дрова і технологічна деревина).

• Performance – up to 100 tons per hour (depending on the type of raw materials);
• The raw materials for processing – all types of wood, as the wood with the content of the stones/metal particles;
• The opportunity to adjust the fraction;
• The possibility of raw materials on both sides (moving the side wall);;
• The intake system allows you to take at the same time, large volumes of raw materials;;
• Engine power — 793 h.p.;
• The country of the manufacturer – Austria

1. The performance and the ability to work with a very complex raw materials.
   The Unique, patented design: a huge hopper with two counter-rotating augers allows the processing of the most complex wood, including. material with stones / metal particles.
2. Reliability and ease of maintenance. Long and successful experience in the use of equipment in Europe. The modularity and quick access to all the components on the engine and equipment for reducing offcut that significantly reduces the time to service;
   Crambo is equipped with modern engine of Caterpillar®. The complete isolation of the engine compartment reduces the noise level to a minimum.